Our FamilyForum
Our FamilyForum Welcome Center => Chit Chat & Humor => Hobbies => Topic started by: Ken on October 01, 2023, 12:59:37 PM
-
Please Note:
... this topic won't be published here on OFF because it's just a 'live site' work-up for a set of posts that I'm preparing for a topic on the NC Woodworker website. (https://ncwoodworker.net/forums/index.php) I'm gonna sell off most of my wood-turning and woodworking equipment and this topic will be posted there once all the details are worked out here in this topic.
Also, any commentary and/or advice on the topic layout, my words herein, or any other comments are most welcome. :)
edit: ... Maybe it ill be published here after all, or, maybe not. shocked028 :hah!:
2nd edit: Moved this Topic to Hobbies! :banana:
-
... this is my first draft of the topic opening:
Hello wood-turning and woodworking friends.
The time has come for me to part with most of my tools and equipment and while this is not a 'fire sale', I do need to dispose of these tools in a timely manner because my health issues make it unlikely that these tools will be of use to me again.
In the following posts I'll include most everything available and the prices will generally be about 50% of new because most of the listed tools have been lightly used, except where noted. I am open to negotiations, especially when bundling two or more items, but please don't waste your time on low ball offers.
If you are interested in any of the tools listed please send me a PM with you contact number and I'll give you a call so that we can setup a meet.
Please note that my location is Tobaccoville, NC, about 10-15 minutes out of Winston Salem.
Also note that should you purchase anything that requires more than one person to load you will be on your own because I would not be able to help in any way.
And, shipping is not going to be available on any of these items, all sales will be in person and cash only.
Thanks for looking... Ken.
-
... Topic heading/name; sometimes the name of a topic can drive the number of clicks or views, so...
Tools For Sale.
Selling Off My Wood-Turning Tools.
Selling Due To Health.
Need To Sell My Tools.
Everything Must Go.
-
Les, may want some of those...
-
No doubt that's true. The shipping might be an issue, but if he has any interest I will surely try and work it out.
-
Haggle, haggle, haggle. LOL
-
laughing7
-
Just changed the topic title to "Most Everything Must Go"
... of course I'll likely change it again at some point. laughing7
My son, Michael, just helped me move everything around and cleaned up a bit so that we could do a photo shoot, so now I'm gonna be processing the pix for posting. I think that I'll post them to the photo gallery here and let them be linked to here when my topic is posted to the woodworking site,
Slowly getting there. :cool:
-
SOLD.
Delta 46-460 12 1/2 Inch Variable Speed Midi Lathe:
This Delta lathe has been lightly used and is in excellent condition and includes a Delta bed extension plus a shop built mobile stand. There are numerous tools and equipment available for the lathe and I would prefer to make a package deal on the lot, but I'm open to all offers.
All of gouges, scrapers, parting tools and similar tools will be included with the lathe. (none of these tools are of a high quality)
Also included, all wood turning blanks, including some maple and walnut plus one purple heart board that is approximately 2x4x3+. Other than the purple heart the wood is just OK and if it dose not go with the lathe it will go in the burn pile.
Asking price; $850.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023131626-102074.jpeg)
-
SOLD.
PSI Woodworking LSR3 Wood Lathe Steady Rest
This steady rest comes in the original box and only used lightly on two or three projects.
Asking; $50.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023134351-1047864.jpeg)
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023134351-10461547.jpeg)
-
SOLD.
In this image you can see a wood chuck set and that goes with the lathe, everything else will be priced separately.
The other items include a pen turning set, knurling tools and a PSI collet chucking system.
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133021-10342333.jpeg)
SOLD.
PSI Collet Chucking System with 5 Collets, used very little.
Asking; $50.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023152719.jpeg)
SOLD.
#2 Morse Taper Keyless Pen Mandrel System, barrel trimmer and includes several pen kits.
Asking; $35.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-081023132204.jpeg)
SOLD.
Texturing/Kurling tools (3), lightly used.
Asking; $80.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-081023133138.jpeg)
-
Sadly, I know nothing about that stuff or I'd buy some.
-
Sadly, I know nothing about that stuff or I'd buy some.
There is more to come of course, but everything listed so far is for wood turning.
-
Measuring Devices:
There are several calipers, rulers and other measuring devices,none of these are of high value so I'm open to offers.
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133525-10361998.jpeg)
-
Workmate 550, aside from being very dusty this Workmate shows very little signs of use.
Asking; $50.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023134448.jpeg)
Shop Built Dust Extraction, this is on a mobile cart and is based on a Craftsman shop vac and has always served me well for my table saw dust extraction. It has seen a lot of use, but still works very well.
Asking; $50.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023134351-10491012.jpeg)
Tap and Die Set, it's from Harbor Freight so it's cheap, but it works OK.
Asking; $25.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023134351-1048926.jpeg)
-
Vintage Delta Scroll Saw, it still works very well.
Asking; $90.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023134351-10451940.jpeg)
Ryobi Sheetrock Screw Gun, well used but still works as expected.
Asking; $25.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133855-10411964.jpeg)
Dewalt 3/4 drill; well used.
Asking; $30.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133525-1038678.jpeg)
-
Ridgid Laminate Trim Router, unused, new in canvas storage bag.
Asking; $65.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133855-1040116.jpeg)
SOLD.
Ridgid Sander and Planer, the sander has seen some use, but still works very well. The planer has seen almost no use, less than 20 bf have been passed through this machine.
Ridgid Sander asking; $75.00
Ridgid Planer asking; $200.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133856-10432485.jpeg)
The shop built mobile cart is also available and includes a Delta 6" grinder.
-
I'll ask on the job if anyone needs these. We sell almost anything to do with electricity, circuit breakers, panels, even underground pipes. Yes, those huge ones. All kinds of stuff like that.
-
Delta Contractors Table Saw, with shop built mobile base and includes. Trend Super Dado set, several extra table saw blades, plus several other odds and ends.
The base is designed to work with the 'Shop Built Dust Extraction' mentioned earlier.
This unit has been well used and is still in good condition.
Asking; $400.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-111023152924-1050231.jpeg)
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-111023152924-10561784.jpeg)
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-111023152924-10572396.jpeg)
-
SOLD.
Face-shield, very good condition.
Asking; $15.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133020-10311895.jpeg)
DeWalt Finish Nailer, used very little, works like new.
Asking; $100.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023131626-10242397.jpeg)
Porter-Cable Pin Nailers(4), very lightly used, these units are in very good to excellent condition.
Asking:
23 gauge with case; $50.00
18 gauge (2); $50.00 ea.
16 gauge; $50.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023133525-10371274.jpeg)
Note: The DeWalt drill motor is not for sale.
-
Delta 14" Bandsaw, has seen some use and still works great.
Asking; $250.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023131207-10161498.jpeg)
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-071023131207-10171046.jpeg)
That's it for now, but I have lots of smaller tools, so if you have something on your wish list just shoot me a note, I might just have what you're looking for.
-
... here's another tool that needs to be added to the list.
Dewalt 12-inch Miter Saw with Ridgid mobile stand.
Has seen some use and still works very good.
Asking; $250.00
(https://www.ourfamilyforum.org/FamilyForum/gallery/1/64-121023134101.jpeg)
-
Just moved this Topic to the Hobbies board. :)
Been getting some interest over on the NCWW Site (https://ncwoodworker.net/forums/index.php?threads/most-everything-must-go.79388/), so maybe we can get some of this equipment sold. One member is set to come over this next Sunday and he seems to have an interest in all the woodturning equipment and tools., so hopefully he likes what I have to offer. :thumbup: